|
HOTTEC CORP.
BONDCERAM 412
Material Safety Data Sheet
1. CHEMICAL PRODUCT AND COMPANY DESCRIPTION
Hottec Corp.
One Terminal Way
Norwich, CT 06360
Emergency Phone Numbers:
For emergencies involving a spill, leak, fire, exposure, or accident
Contact: Hottec Corp. 860-887-5111, evenings 860-822-1701
For Product Information:
860-887-5111
Chemical Name or Synonym:
Contains silicic acid, potassium salt, water, metallic oxide fillers
2. PHYSICAL DATA
Appearance & Odor:
Viscous liquid. White Odorless.
Specific Gravity (liquids only):
1.45
Solubility In Water:
Partial
Solids Content:
Approximately 70 % by wt.
pH (aqueous liquids only):
11.8
3. FIRE, EXPLOSION AND REACTIVITY HAZARD DATA
Flash Point (F):
Non-combustible
Special Fire Fighting Procedures:
Not-applicable
Stability:
Stable
Conditions To Avoid:
Flammable hydrogen gas may be produced on prolonged contact with
metals such as aluminum, tin, lead, and zinc.
Incompatibility (materials to avoid):
Concentrated acids. Gels when mixed with acids
Hazardous Decomposition Products:
Hydrogen gas
4. SPILLS AND DISPOSAL
Environmental Hazards:
High pH (alkalinity of undiluted or unneutralized material is harmful
to aquatic life). Not a listed as an extremely hazardous substance or
toxic chemical under SARA Title III, 302, 304, or 313.
Spillage:
Sinks and mixes with water. Isolate, dike and store discharged
material, if possible. Otherwise disperse and flush with water. Observe
environmental regulations. Not a RCRA Hazardous waste.
Waste Disposal Method:
Neutralize with dilute acid and landfill solids according to local,
state and federal regulations. Flush neutral liquid to sewer with plenty
of water.
5. HEALTH HAZARD DATA
Eye Contact:
Causes eye irritation.
Skin Contact:
Causes skin irritation.
Inhalation:
Causes irritation to respiratory tract.
Ingestion:
Causes irritation to esophagus and stomach.
Chronic Hazards:
No known chronic hazards. Not listed by OSA, NTP or IARC as a
carcinogen.
Signs and Symptoms of Exposure:
Burning or itching in nose and throat (inhalation). Pain, redness and
tearing (eye exposure). Itching or burning (skin exposure).
Medical conditions aggravated by exposure:
Asthma and lung diseases, skin diseases.
First Aid Procedures:
In case of contact, immediately flush eyes and skin with plenty of
water for at least 15 minutes. Call a physician. If swallowed, do NOT
induce vomiting. Give victim a glass of water. Call a physician. Never
give anything by mouth to an unconscious person.
6. SPECIAL PROTECTION INFORMATION
Respiratory Protection:
Use NIOSH-certified mist respirator where mist occurs. Observe OSHA
regulations for respirator use (29 CFR 1910.134).
Gloves:
Wear rubber gloves.
Eye Protection:
Chemical goggles and/or face shield.
Other Protective Equipment:
Safety shower and eyewash fountain should be within direct access.
Personal Hygiene:
Avoid contact with eyes, skin, and clothing. Do not breathe spray
mist. Wash thoroughly after handling. Wash contaminated clothing before
reuse.
Engineering Control:
Use with adequate ventilation. Keep container closed.
7. SUBSTANCES FOR WHICH STANDARDS HAVE BEEN SET
OSHA Permissible Exposure Limit or ACGIH Threshold Limit Value have
not been established. PQ recommended Ceiling limit 5mg/m3 Respirable
mist.
Exposure Analysis Methods:
See: NIOSH Manual of Analytical Methods, 4th ed., Method 7401.
|
